Power washing is a quick and efficient way to clean outdoor surfaces such as driveways, patios, and sidewalks.
The high-pressure water blast removes dirt, grime, and even stubborn stains, leaving the surface looking like new.
In this article, we will go through the steps of power washing a driveway.
Materials you will need:
- Pressure washer
- Stiff brush
- Eye protection
- Rubber gloves
Step 1: Preparation
Before starting, remove any loose items such as toys, lawn furniture, or planters from the area you will be power washing. Next, check the weather forecast and avoid washing on days with high winds or heavy rain.
Step 2: Determine the appropriate pressure setting
Different surfaces require different levels of pressure. For concrete driveways, a pressure setting of 1500 to 2000 PSI (pounds per square inch) is usually sufficient. Be careful not to set the pressure too high as it could cause damage to the surface. If you are unsure, refer to the manufacturer’s instructions or consult a professional.
Step 3: Mix the detergent
Fill the pressure washer detergent tank with a recommended cleaning solution or mix your own. A solution of one part household bleach to ten parts water is an effective and affordable option.
Step 4: Apply the detergent
Begin by applying the detergent to a small section of the driveway using the low pressure setting. Let it sit for five to ten minutes to allow it to penetrate and loosen any stubborn dirt or stains.
Step 5: Power wash
Start at the highest point of the driveway and work your way down, using a sweeping motion. Keep the nozzle about two feet away from the surface and move it constantly to avoid damaging the concrete.
Step 6: Rinse
Once you have finished power washing, rinse the surface thoroughly with the pressure washer set to low pressure to remove any remaining detergent and dirt.
Step 7: Clean up
Allow the surface to air dry or use a clean, dry cloth to wipe away any excess water. Store the pressure washer and any unused detergent properly.
In conclusion, power washing a driveway is a simple and effective way to rejuvenate the surface and make it look like new. Just remember to take necessary precautions and follow these steps to get the best results.